Power from shore
The onboard dry-type transformer connects the dredger to its onshore electrical supply, providing power for the electric dredging and working equipment.
Italdraghe SGT 400 E · Eco-Green Dredger
EV Dredger
Electric cutter suction dredging, powered from shore. The SGT 400 E brings a 500 kW dredging pump and a 75 kW cutter together in a modular dredger for project-specific deployment.
500 kWElectric dredging pump
75 kWElectric cutter head
3,000 m³/hMaximum mixture flow
7.5 mDredging depth
01 / Power & control
Built around an electric system.
Shore power supplies the onboard electrical system. Confirm the site connection and supply capacity before specifying the dredger.
Adjustable electric drive
Inverters control starting and adjustment of the dredging pump drive and the cutter motor. The 500 kW and 75 kW ratings describe these two systems individually.
Electric working equipment
Electric winches control the swing motion, raise the ladder and move the two spuds. The manufacturer describes operation by one person from the control cabin.
Site electrical design must account for the complete installed load, auxiliaries and operating conditions; the pump and cutter ratings alone do not define the required shore connection.
02 / Modular construction
Designed to reach the project.
The dredger can be dismantled for transport by road, rail or sea, then assembled at the work site. Its layout combines the pump installation, control cabin, cutter ladder and spud equipment on a transportable platform.
Plan the access route, lifting arrangements, assembly area and shore power supply together. Confirm transport dimensions and component weights with the manufacturer for the selected configuration.
Open the original datasheet ↗03 / Technical data
SGT 400 E technical specifications.
Manufacturer data for the standard arrangement described in the supplied datasheet.
Dimensions & working envelope
- Overall length · ladder raised
- 25.44 m
- Length at waterline
- 18.86 m
- Width
- 7.75 m
- Average working draught
- 0.70 m
- Dredging depth
- 7.50 m
- Maximum mixture capacity
- 3,000 m³/h
Dredging pump & cutter
- Dredging pump
- Italdraghe PD 400R
- Electric pump power
- 500 kW
- Suction / discharge diameter
- 400 / 400 mm
- Electric cutter
- Italdraghe D1450 · 75 kW
- Cutter diameter
- 1,480 mm
- Maximum cutter speed
- 27 rpm
3,000 m³/h is a maximum water-and-material mixture flow, not a solids production rate. Actual output depends on the material, discharge pipeline, pumping head and site conditions. The manufacturer’s performance curves are indicative and require adjustment for each project.
04 / Winches, spuds & electrical system
Controlled movement. Electric handling.
Winches & spuds
- Swing winches
- 2 electric winches
- Swing winch maximum speed
- 15 m/min
- Swing winch first-layer pull
- 4 t
- Ladder raising winch
- 15 m/min · 4 t first-layer pull
- Spuds
- 2 · moved by electric winch
- Approximate spud length
- 11.20 m
- Spud diameter
- 406 mm
- Approximate spud weight
- 1,950 kg each
Power supply & control
- Power source
- Onshore electrical supply
- Onboard transformer
- 1 dry-type transformer
- Pump motor control
- Inverter for starting and adjustment
- Cutter motor control
- Inverter adjustment
- Operator station
- Control cabin · single-operator design
05 / Optional equipment
Configure for the dredging project.
Availability and suitability must be confirmed for the final scope. Optional items are not implied to be included in the standard specifications.
Positioning & working reach
Options include a spud carriage, anchor booms with enlarged side pontoons, positioning equipment and increased dredging depth.
Discharge & production
Discuss pipeline length and diameter, discharge equipment, booster pumps and production measurement as part of the complete dredging system.
Operator environment & support
Cabin damping, air conditioning and on-site operator training are listed options. Supporting pipelines and workboats can also be discussed with the manufacturer.
06 / Source documentation
Review the manufacturer’s data.
Product photographs, arrangement and specifications are based on the supplied Italdraghe SGT 400 E datasheet.
Technical data are manufacturer guidelines and may change. Confirm the final configuration, electrical interface and guaranteed duty point directly for your project before ordering.
