BlueCurrent บลูเคอร์เรนต์

Electric cargo landing craft

EV Workboat

Cargo capability. Shore-to-shore.

A 12-metre aluminium landing craft with twin CAMY electric outboards, a bow loading ramp and a 3-ton-class deck crane. Built around practical river, pier and approved island logistics.

EV aluminium workboat with bow ramp at a beach
Concept visual · 12 m platform
8 tMaximum cargo payload*
2 × 50 kWCAMY electric outboards
400 kWhBattery capacity
3 tCrane class · reach dependent*
*Payload and crane limits are subject to stability verification and the approved crane load chart. Product data reviewed 27 September 2026.

01 / Vessel configuration

Ramp access. Crane reach. Electric drive.

A compact cargo platform for destinations where fixed loading infrastructure is limited.

Workboat crane unloading at a riverside pier
Crane-assisted handling at a riverside pier · concept visual
Overall length
12.0 m
Beam / hull depth
3.0 m / 1.5 m
Hull construction
Aluminium
Maximum cargo payload
8 t*
Crane / loading access
3-ton class / bow ramp
Rated propulsion
100 kW (2 × 50 kW)
Battery pack mass
4.0 t
Battery + two outboards
4.5 t

02 / Energy & performance

Know the route. Plan the reserve.

Updated brochure estimates: 13 kn light and 9 kn at the full 8-ton payload. Confirm performance through vessel trials.

Energy basis

80 kW

Assumed combined battery draw at the 80% setting: 40 kWh/hour per motor.

5.0 hTheoretical · zero reserve
4.0 hWith 20% reserve
Calculated range per charge (km)
Range basisLight · 13 knLoaded · 9 kn
Total · zero reserve120.483.3
Return-trip radius · zero reserve60.241.7
Total · 20% reserve96.366.7
Return-trip radius · 20% reserve48.233.3

Theoretical estimates assume the stated speeds at 80 kW battery draw. Radius assumes equal out-and-back legs at the same loading. Auxiliary loads and unusable battery capacity are excluded; current, sea state and losses affect actual range. These are not guaranteed operating ranges.

03 / Weight & draft

A transparent design basis.

Preliminary weight build-up and draft estimates from the latest five-page workboat brochure.

4.0 tStructure + crane
4.5 tBattery + outboards
8.5 tPreliminary lightship
16.5 tWith 8-ton cargo
Preliminary displacement and draft
ConditionDisplacementEstimated draft
Lightship8.5 t0.36–0.39 m
Maximum cargo16.5 t0.71–0.76 m
Recommended design condition*17.5–18.0 t0.75–0.83 m

*Includes crew, EV auxiliaries, safety equipment, mooring gear and allowance. Design target: approximately 0.85 m loaded draft, leaving approximately 0.65 m of hull depth. Calculation basis: LWL 11.4 m, BWL 2.85 m, block coefficient 0.65–0.70, seawater. Freshwater draft is approximately 2.5% greater. Final hull lines, weight take-off, stability analysis, inclining test and authority/class approval are required.

04 / Service profile

Built around the working day.

01

Inland waterways

River and canal cargo delivery.

02

Island supply

Resort and approved coastal logistics.

03

Pier to shore

Cargo transfer by ramp or crane.

04

Utility work

Maintenance and project support.

Final service area, lifting limits and safety equipment remain subject to stability assessment, weather limitations, local operating conditions and authority or class approval. A 3-ton crane rating does not mean 3 tonnes can be lifted at every reach.

Our official partners

Expertise behind the current.

Electric power-system expertise and Thai shipyard capability, connected through BlueCurrent.